MODEL: HELL FIRE

GRIPKNIFE 11” FIXED BLADE (FULL-SIZE DUTY KNIFE)

MSRP: $159 (CPM Magnacut, G10)

The 11” GripKnife HELLFIRE is built to be the first truly modular full-size duty knife ever released, allowing a fighter’s knife to convert seamlessly between boot, belt, pocket clip, and MOLLE carry without needing different sheaths. Most 11-inch fixed blades are either too bulky or too specialized; this one solves both problems by using a unified mounting geometry, a GFN-PA6 high-retention sheath, and a sculpted ribbed G10 handle that delivers grip in every weather condition. The CPM Magnacut blade gives it premium performance normally found only in $250+ knives. In short, HELLFIRE blends combat reliability, premium steel, and full modularity—something no major knife brand has ever offered in a single platform.

Specifications

• Overall Length: 11”

• Blade Length: 6” (4.5” cutting edge)

• Blade Width: 1.5”

• Blade Steel: CPM Magnacut

• Blade Thickness: 5 mm

• Blade Style: Reinforced spear-point

• Handle Material: G10 or injection-molded composite

• Handle Length: 90.5 mm

• Handle Thickness: 25 mm

• Tang: Full tang

• Hardware: Cross-pattern hex screws

• Weight: Balanced for forward thrust & boot carry

• Sheath: GFN-PA6 Universal Sheath System

• Carry Options: Boot, belt, pocket clip, MOLLE, pack-mount

• Mounting: Universal 4-point pattern, interchangeable plates

• Other Features:

• 12 × 5 mm weight-reducing spine ports

• Impact pommel

• High-traction ribbed grip

• Reinforced tip for penetration strength

HELLFIRE

$159.00

Quantity

As with all of our products, if it breaks, we will fix it or get you a new one. Doesn't matter if you are the original buyer or not.

OUR STANDARDS.

Precision machined utilizing the most advanced materials and coatings on earth, specifically those created for the most extreme environments and conditions known to man. Gripknife is the the strongest and most reliable knife in its class by a long shot. Explore our current selection and reach out to place an order or gain more insights.

THE BLADE:

Known globally for its extreme strength, toughness, wear resistance, and superior properties, we precision machined our blade from M2 High Speed Steel. Designed primarily for cutting tool applications, M2 is used to make tools, bits, and blades that cut other steels and metals in various machining applications. Then, in a special furnace that’s absent of air and other gasses and capable of reaching over half the surface temperature of the sun, our blade is pushed to extremely high temperatures that change and vastly improve the mechanical properties of the steel itself. This makes it not only extremely consistent, but takes strength, hardness, toughness, and durability to an entirely different level—our level. Next, our blade is cooled down to around -300°F (close to the surface temperature of Pluto) through the use of liquid nitrogen. This changes the crystal structure of our blade on a molecular level and removes any stresses caused by heat-treatment and machining; resulting in even greater strength, hardness, and maximum wear resistance. After a few more intense processes like this, the blade is ready for the chassis.

- M2 High-Speed Steel
- Vacuum Heat Treatment
- Cryogenic Snap Temper
- Precision Machined
- Wear Resistant
- Corrosion Resistant
- Minimal Blade Contact
- Precision Blade Transition

THE FRAME:

We started from scratch. We did away with the standard of having grips layered on top of thin “cookie cutter” type liners, of which are all then held together by many small screws, spacers, pins, etc. (fail points). We built a 2-piece frame—a Chassis. Our Model 7 Chassis is 2 pieces inter-locked together—even without the use of screws (as shown) it’s already incapable of moving in nearly every direction—this eliminates the majority of the weaknesses found in most collapsible knives made today. Nothing like this has ever been done, but we wanted to achieve a level of strength never before imagined. We wanted our strength to come from design, not the amount of hardware added to the design—in fact, we wanted as few parts and hardware as possible, and this is why the chassis is only 2 parts and 2 screws. Our Model 7 Chassis is our latest design that delivers a new standard of collapsible knife strength, engineering, and precision.

- 17-4 Stainless Steel
- Precipitation Hardened
- Precision Machined
- Self Lubricating
- Wear Resistant
- Corrosion Resistant
- Minimal Blade Contact

- Precision Blade Transition
- Dovetail Track

THE LOCKS:

The industry problem was that blade locks on traditional out-the-front knife designs are considered by many to be “inherently weak” when compared with other collapsible knife designs such as your folding knives. We needed something stronger, something that could compete with the locks of folding knives—something that could bust through concrete, and to the best of our knowledge, locks that strong don’t exist on any knife. First we needed a lock that worked reliably, and then we needed to make it stronger than anything ever before, if that was possible. While sweeping the shop floor, the design idea was born. Within a week we had a working prototype, and as if it were meant to be, it worked reliably the very first time. After several tweaks (and broken cinder blocks) later, the official Linear Cam Locks were born. Relying heavily on the design of the chassis to create strength through synergy, our locks can withstand a variety of extreme forces on a level that we believe has never been attained in a collapsible production knife.

-17-4 Stainless Steel

- Precipitation Hardened
- Precision Machined
- Premium Protective Coating
- Wear Resistant
- Corrosion Resistant
- Minimal Blade Contact
- Precision Blade Transition
- Type: Linear Cam
- Seated, Pressed, Bolted

HELLFIRE

Lifetime Warranty

OUR STANDARDS.