MODEL: INFLUENCER

GRIPKNIFE 8” MID-SIZE FIXED BLADE (BOOT KNIFE)

MSRP: $129 (CPM Magnacut / Micarta)

The 8” GripKnife is the first boot knife engineered to be genuinely modular, not an afterthought accessory. You get the control and stabbing geometry of a full-duty tactical blade in a compact footprint that still uses the exact same universal sheath system as the 11” and 5.25”. Most boot knives are cheap, thin, or compromised. This one uses CPM Magnacut, a reinforced mid-size spear-point, and micarta or G10 handles—premium materials never offered in the boot-knife category. It transitions from boot to belt to MOLLE to pocket carry without swapping sheaths, making it the most adaptable knife of its size on the market.

Specifications

• Overall Length: 8”

• Blade Length: 3”

• Blade Width: 1.25”

• Blade Steel: CPM Magnacut

• Blade Thickness: 4.5 mm

• Blade Style: Spear-point

• Handle Options:

• G10 / Injection Molded

• Micarta (stonewash blade option)

• Handle Length: 88.5 mm

• Handle Thickness: 24.5 mm

• Tang: Full tang

• Hardware: Dual cross screws

• Sheath: GFN-PA6 Universal Sheath System

• Carry Modes: Boot, belt, pocket clip, MOLLE, pack-mount

• Key Feature: Same mounting pattern as 11” and the 5.25”

• Other Features:

• Reinforced tip

• Compact duty geometry

• Deep retention with strap-over locking option

• High bite ribbing for gloveless control

DAMNATION

$129.00

Quantity

OUR STANDARDS.

Precision machined utilizing the most advanced materials and coatings on earth, specifically those created for the most extreme environments and conditions known to man. Gripknife is the the strongest and most reliable knife in its class by a long shot. Explore our current selection and reach out to place an order or gain more insights.

THE BLADE:

Known globally for its extreme strength, toughness, wear resistance, and superior properties, we precision machined our blade from M2 High Speed Steel. Designed primarily for cutting tool applications, M2 is used to make tools, bits, and blades that cut other steels and metals in various machining applications. Then, in a special furnace that’s absent of air and other gasses and capable of reaching over half the surface temperature of the sun, our blade is pushed to extremely high temperatures that change and vastly improve the mechanical properties of the steel itself. This makes it not only extremely consistent, but takes strength, hardness, toughness, and durability to an entirely different level—our level. Next, our blade is cooled down to around -300°F (close to the surface temperature of Pluto) through the use of liquid nitrogen. This changes the crystal structure of our blade on a molecular level and removes any stresses caused by heat-treatment and machining; resulting in even greater strength, hardness, and maximum wear resistance. After a few more intense processes like this, the blade is ready for the chassis.

- M2 High-Speed Steel
- Vacuum Heat Treatment
- Cryogenic Snap Temper
- Precision Machined
- Wear Resistant
- Corrosion Resistant
- Minimal Blade Contact
- Precision Blade Transition

THE FRAME:

We started from scratch. We did away with the standard of having grips layered on top of thin “cookie cutter” type liners, of which are all then held together by many small screws, spacers, pins, etc. (fail points). We built a 2-piece frame—a Chassis. Our Model 7 Chassis is 2 pieces inter-locked together—even without the use of screws (as shown) it’s already incapable of moving in nearly every direction—this eliminates the majority of the weaknesses found in most collapsible knives made today. Nothing like this has ever been done, but we wanted to achieve a level of strength never before imagined. We wanted our strength to come from design, not the amount of hardware added to the design—in fact, we wanted as few parts and hardware as possible, and this is why the chassis is only 2 parts and 2 screws. Our Model 7 Chassis is our latest design that delivers a new standard of collapsible knife strength, engineering, and precision.

- 17-4 Stainless Steel
- Precipitation Hardened
- Precision Machined
- Self Lubricating
- Wear Resistant
- Corrosion Resistant
- Minimal Blade Contact

- Precision Blade Transition
- Dovetail Track

THE LOCKS:

The industry problem was that blade locks on traditional out-the-front knife designs are considered by many to be “inherently weak” when compared with other collapsible knife designs such as your folding knives. We needed something stronger, something that could compete with the locks of folding knives—something that could bust through concrete, and to the best of our knowledge, locks that strong don’t exist on any knife. First we needed a lock that worked reliably, and then we needed to make it stronger than anything ever before, if that was possible. While sweeping the shop floor, the design idea was born. Within a week we had a working prototype, and as if it were meant to be, it worked reliably the very first time. After several tweaks (and broken cinder blocks) later, the official Linear Cam Locks were born. Relying heavily on the design of the chassis to create strength through synergy, our locks can withstand a variety of extreme forces on a level that we believe has never been attained in a collapsible production knife.

-17-4 Stainless Steel

- Precipitation Hardened
- Precision Machined
- Premium Protective Coating
- Wear Resistant
- Corrosion Resistant
- Minimal Blade Contact
- Precision Blade Transition
- Type: Linear Cam
- Seated, Pressed, Bolted